Take up with Bobbin Traversing arrangement with Servo Motor and ball screw, HMI and PLC.
Bobbin bolding : Pintle type between Head stock and tail stock
Head stock : Head stock is mounted on sturdy housing with heavy duty bearings
with grease lubrication. Drive from motor and reduction gear box is transmitted to
head stock shaft by Timer Belt
Tail stock : Tail stock shaft assembled on a sturdy housing with heavy duty bearings. Tail stock will be operated by 2 No Air cylinder , solenoid valve and Push buttons .
Machine Construction : The bobbin loaded between head stock and tail stock , Gearbox,
drive motor , Ball screw assembly with servo motor and encoder are mounted on a platform supported on L.M blocks and rail
The whole machine with bobbin ,drive motor and associated assemblies will be traversing on the base frame . The material will be guided
to the bobbin from the stationary tensioning roller stand . The linear movement of the platform is with Servo motor .
Traverse pitch and traverse Stroke length can be very finely controlled through HMI and PLC.
Winding sequence can be programmed .
Traverse : The platform is traversed with servo motor , servo drive system and Ball screw.
Speed synchronization between spooler drive motor and servo motor is through HMI, PLC and encoder.
Length Counter : Length displayed in HMI
Brake : .Pneumatic disc brake
Bobbin drive : By AC Motor with reduction gear box
Tensioning Roller stand : Provided. Guide arm will be motorized and PLC controlled.
Control Panel . Supplied
Bobbin Loading unloading: Motorized