1 2 3 4

Pay Off

A) Motorized Pay off stand with dancer assembly

Spool holding : Pintle type between head stock and tail stock /Cantilever shaft type with Pintles and lock nut

Tail Stock pintle movement options : Pneumatically operated / Screw type with handle

Machine Construction : Fabricated construction with Head stock, Tail Stock and Motor mounted on common bed

Brake : Pneumatic Disc brake / Electromagnetic brake

Drive types : AC motor with variable frequency drive

Bobbin loading /unloading options : Motorized or Hydraulically operated loading platform, / Adjustable Ramp


B) Non driven pay off stand with tensioning brake .

Spool holding options : Pintle type between head stock and tail stock /Cantilever shaft type with Pintles and lock nut

Tail Stock pintle movement options : Pneumatically operated / Screw type with handle

Machine Construction : Fabricated construction with Head stock, Tail Stock . mounted on common bed

Brake : Pneumatic Disc brake / Electromagnetic brake

Tension control. :With disc brake and air pressure regulator or with caliper disc brake


C) Swift-type pay offCoil of steel is loaded on a turn table with adjustable segments suitably mounted vertically withheavy duty bearings on top and bottom. Turn table mounted on heavy duty bearings. Coil is loaded on a turn type table mounted with heavy duty bearings on top and bottom with adjustable rods. Inside diameter of the stand can be adjusted with handle provided on top; for holding the coil tightly. Base diameter will be as per max outside dia of coil.

Tensioning : by disc brake with Air pressure regulator / caliper type disc brake

Brake : Disc brake operated by solenoid valve

Horizontal Pay off stand is available for Strip .


D) Flier type Pay off.

Wire size : Fine gauge wires up to 0.5 mm

Material : Aluminum/ copper wire

The wire will be unwound from the bobbin kept vertically on the floor using flier to winding machine.

Tensioning brake : Adjustable by felt.

Find Our Location

Contact Us

  • 14/404 A, Major Sandeep Unnikrishnan Road,
          Kozhikode - 673 655, Kerala, India
  • CEO : V.K. Krishnakumar +91 9846 090 164
  • +91 495 2481295, 2485334, 2483394
  • rollringindustries@gmail.com
Copyright © 2018 | Rollring. All rights reserved.